Yeastar TA100 is an Analog Telephone Adapter that provides 1 analog interface for
residential users and small business to convert existing analog equipment to
IP-based networks cost effectively.
Ports | 1 FXS Port | |
Telephony Interfaces | RJ11 | |
LAN | 1 10/100 Mbps | |
Micro USB Port | 1 | |
Protocol | SIP (RFC3261) | |
Transport | UDP, TCP, TLS, SRTP | |
Codec | G.711 (aLaw/uLaw), G.729A/B | |
DTMF Mode | RFC2833, SIP Info, In-band | |
Voice Capability | ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer | |
Fax | T.30 Pass-through | |
QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging | |
Network | DHCP, OpenVPN, PPPoE, Static Route, VLAN | |
Network Protocol | FTP, TFTP, HTTP, HTTPS, SSH | |
Management Protocol | TR-069* | |
Signaling | FXS Loop Start, FXS Kewl Start | |
Caller ID | BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID | |
Disconnect Methods | Busy Tone, Polarity Reversal | |
Power | DC 5V 1A | |
Dimensions (L × W × H) (mm) | 85 x 58 x 24 | |
Humidity | 10-90% non-condensing | |
Storage Range | -20°C to 65°C, -4°F to 149°F | |
Operation Range | 0°C to 40°C, 32°F to 104°F | |
Mounting | Desktop | |
Compatibility | Interoperable with 3CX, Asterisk, Lync Server, FreePBX and certified with Elastix and BroadSoft |